International Conference
-
T. Hirano
"Characterization of temporal properties of SACLA-XFEL pulses using X-ray interferometry"
HeKKSaGOn WG5 one-day preconference discussion meeting "Dynamic Imaging for Physical, Chemical, and
Biological interests" (11 April, Osaka University, Osaka, Japam)
-
J. Yamada
"Hard-X-ray imaging mirrors for compact and high-resolution full-field microscopy"
HeKKSaGOn WG5 one-day preconference discussion meeting "Dynamic Imaging for Physical, Chemical, and
Biological interests" (11 April, Osaka University, Osaka, Japam)
-
K. Yamauchi
"Cutting-edge optics for X-ray microscopy based on SR and FEL"
The 6th HeKKSaGon University Presidents' Conference WG5 (12-13 April, Osaka University, Osaka,
Japan)
-
T. Osaka(invited)
"Recent Progress of SACLA"
International Conference on X-ray Optics and Applications 2018 (XOPT2018) in OPIC2018, XOPT1-3 (24-26 April,
Pacifico Yokohama, Kanagawa, Japan)
-
J. Yamada, S. Matsuyama, Y. Sano, Y. Kohmura, M. Yabashi, T. Ishikawa, and K. Yamauchi
"Compact and large-magnification full-field X-ray microscope using concave-convex imaging mirrors"
International Conference on X-ray Optics and Applications 2018 (XOPT2018) in OPIC2018, XOPT7-1 (24-26 April,
Pacifico Yokohama, Kanagawa, Japan)
-
Y. Morioka, T. Hirano, Y. Sano, S. Matsuyama, T. Osaka, T. Katayama, M. Yabashi, and K. Yamauchi
"Depelopment of Channel-cut Crystal X-ray Monochromators for Low-emittance X-ray Sources Using
High-presicion Plasma Etching"
International Conference on X-ray Optics and Applications 2018 (XOPT2018) in OPIC2018, XOPTp9-18 (24-26
April, Pacifico Yokohama, Kanagawa, Japan)
-
T. Hirano, Y. Morioka, Y. Sano, T. Osaka, S. Matsuyama, M. Yabashi, and K. Yamauchi
"Development of Fabrication Method of Speckle-free Channel-cut Crystal X-ray Monochromators with Sub-mm
Channel Width "
International Conference on X-ray Optics and Applications 2018 (XOPT2018) in OPIC2018, XOPTp9-19 (24-26
April, Pacifico Yokohama, Kanagawa, Japan)
-
T. Inoue, S. Matsuyama, S. Kawai, H. Yumoto, Y. Inubushi, T. Koyama, K. Tono, T. Osaka, H. Ohashi, M.
Yabashi, T. Ishikawa, and K. Yamauchi
"Development of nanofocusing system for X-ray free electron Laser (Study of nanobeam characterization)"
International Conference on X-ray Optics and Applications 2018 (XOPT2018) in OPIC2018, XOPTp9-24 (24-26
April, Pacifico Yokohama, Kanagawa, Japan)
-
K. Hata, J. Yamada, S. Matsuyama, Y. Sano, Y. Kohmura, M. Yabashi, T. Ishikawa, and K. Yamauchi
"Development of high-resolution X-ray imaging optical system using multilayer imaging mirrors"
International Conference on X-ray Optics and Applications 2018 (XOPT2018) in OPIC2018, XOPTp9-25 (24-26
April, Pacifico Yokohama, Kanagawa, Japan)
-
H. Yamaguchi, T. Goto, H. Hayashi, S. Matsuyama, J. Sonoyama, K. Akiyama, H. Nakamori, Y. Sano, Y. Kohmura,
M. Yabashi, T. Ishikawa, and K. Yamauchi
"Development of adaptive X-ray focusing system based on a combination of a piezoelectric bimorph mirror and
a mechanical mirror bender"
International Conference on X-ray Optics and Applications 2018 (XOPT2018) in OPIC2018, XOPTp9-26 (24-26
April, Pacifico Yokohama, Kanagawa, Japan)
-
H. Nakamori, H. Okada, S. Aono, K. Yamauchi, and T. Tsumura
"Current X-ray mirrors and metrology of JTEC Corporation "
International Conference on X-ray Optics and Applications 2018 (XOPT2018) in OPIC2018, XOPTp9-31 (24-26
April, Pacifico Yokohama, Kanagawa, Japan)
-
P. V. Bui, Y. Nakahira, D. Toh, S. Matsuyama, Y. Sano, and K. Yamauchi
"High-efficiency planarization of SiC in pure water using a thin film catalyst"
Euspen's 18th International Conference, P6.18 (4 June - 8 June, Venice Terminal Passeggeri, Venice,
Italy)
-
D. Toh, P. V. Bui, Y. Nakahira, H. Kida, T. Ohgushi, S. Matsuyama, Y. Sano, and K. Yamauchi
"Development of high efficiency polishing method using pure water and Ni catalyst"
Euspen's 18th International Conference, P6.19 (4 June - 8 June, Venice Terminal Passeggeri, Venice,
Italy)
-
T. Inoue(invited), S. Matsuyama, S. Kawai, H. Yumoto, Y. Inubushi, T. Koyama, K. Tono, T. Osaka, H.
Ohashi, M. Yabashi, T. Ishikawa, and K. Yamauchi
"Fabrication of ultraprecise multilayer focusing mirrors using an X-ray grating interferometer and
differential deposition technique"
The 6th International Workshop on X-ray Optics and Metrology Satellite Meeting of SRI 2018 (IWXM 2018)
Session II "Fabrication and Finishing Technologies for X-ray Mirrors" (6-9 June, National Synchrotron
Radiation Research Center, Hsinchu, Taiwan)
-
J. Yamada(invited), S. Matsuyama, Y. Sano, Y. Kohmura, M. Yabashi, T. Ishikawa, and K. Yamauchi
"Development of reflective imaging optics using concave and convex mirrors"
The 6th International Workshop on X-ray Optics and Metrology Satellite Meeting of SRI 2018 (IWXM 2018)
Session II "Fabrication and Finishing Technologies for X-ray Mirrors" (6-9 June, National Synchrotron
Radiation Research Center, Hsinchu, Taiwan)
-
H. Nakamori(invited), T. Goto, S. Matsuyama, H. Hayashi, H. Yamaguchi, J. Sonoyama, K. Akiyama, Y.
Sano, Y. Kohmura, M. Yabashi, T. Ishikawa, H. Okada, and K. Yamauchi
"Development of adaptive Kirkpatrick-Baez mirrors based on bimorph and mechanical bending"
The 6th International Workshop on X-ray Optics and Metrology Satellite Meeting of SRI 2018 (IWXM 2018)
Session III "Active/Adaptive and Zoom Optics & Optics Developments" (6-9 June, National Synchrotron
Radiation Research Center, Hsinchu, Taiwan)
-
T. Inoue, S. Matsuyama, S. Kawai, H. Yumoto, Y. Inubushi, T. Koyama, K. Tono, T. Osaka, H. Ohashi, M.
Yabashi, T. Ishikawa, and K. Yamauchi
"Development of a multilayer Kirkpatrick-Baez mirror optics
for X-ray free electron laser"
The 13th International Conference on Synchrotron Radiation Instrumentation (SRI 2018), PD1-16 (10-15 June,
Taipei International Convention Center, Taipei, Taiwan)
-
H. Yamaguchi, T. Goto, H. Hayashi, S. Matsuyama, J. Sonoyama, K. Akiyama, H. Nakamori, Y. Sano, Y. Kohmura,
M. Yabashi, T. Ishikawa, and K. Yamauchi
"Development of hybrid X-ray adaptive optical system based on piezo-driven deformable mirror and a
mechanical mirror bender"
The 13th International Conference on Synchrotron Radiation Instrumentation (SRI 2018), PD1-18 (10-15 June,
Taipei International Convention Center, Taipei, Taiwan)
-
H. Nakamori, H. Okada, K. Yamauchi, and T. Tsumura
"Metrology and X-ray mirrors of JTEC Corporation"
The 13th International Conference on Synchrotron Radiation Instrumentation (SRI 2018), PD1-33 (10-15 June,
Taipei International Convention Center, Taipei, Taiwan)
-
T. Hirano, Y. Morioka, Y. Sano, T. Osaka, T, Katayama S. Matsuyama, M. Yabashi, and K. Yamauchi
"Development of speckle-free narrow-channel-cut crystal monochromators for low-emittance X-ray sources"
The 13th International Conference on Synchrotron Radiation Instrumentation (SRI 2018), PD2-04 (10-15 June,
Taipei International Convention Center, Taipei, Taiwan)
-
J. Yamada(invited), S. Matsuyama, Y. Sano, Y. Kohmura, M. Yabashi, T. Ishikawa, and K. Yamauchi
"Hard-x-ray imaging mirror optics using concave and convex mirrors"
The 13th International Conference on Synchrotron Radiation Instrumentation (SRI 2018), C4.4 (10-15 June,
Taipei International Convention Center, Taipei, Taiwan)
-
T. Osaka(invited)
"Development of hard X‐ray split‐delay optics at SACLA"
The 13th International Conference on Synchrotron Radiation Instrumentation (SRI 2018), F1.5 (10-15 June,
Taipei International Convention Center, Taipei, Taiwan)
-
S. Matsuyama(invited)
"Full‐field imaging and focusing with advanced mirror‐based optics"
The 13th International Conference on Synchrotron Radiation Instrumentation (SRI 2018), G3.1 (10-15 June,
Taipei International Convention Center, Taipei, Taiwan)
-
K. Yamauchi(invited)
"Novel Reflective Optics and Systems for Hard X-ray Microscopy"
2018 Denver X-ray Conference (DXC)
Imaging (Meadowbrook), S-6 (6-10 August, The Westin, Westminster, Colorado, USA)
-
J. Yamada(invited)
"Reflective Imaging Optics using Concave and Convex Mirrors for A Compact and Achromatic Full-field X-ray
Microscope"
14th International Conference on X-ray Microscopy (XRM2018), RB01 (19-24 August, TCU Place, Saskatoon,
Saskatchewan, Canada)
-
S. Matsuyama
"High-resolution full-field X-ray microscope for 20-keV X-rays with multilayer imaging mirrors"
14th International Conference on X-ray Microscopy (XRM2018), P_A79 (19-24 August, TCU Place, Saskatoon,
Saskatchewan, Canada)
-
T. Hirano, Y. Morioka, Y. Sano, T. Osaka, T. Katayama, S. Matsuyama, M. Yabashi, and K. Yamauchi
"Fabrication method of speckle-free channel-cut crystal monochromators for low-emittance x-ray sources"
SPIE Optics+Photonics2018, oral10760-16 (19-23 Aug., San DIego Convention Center, San Diego, California,
US)
-
H. Nakamori, T. Goto, S. Matsuyama, H. Hayashi, H. Yamaguchi, J. Sonoyama, K. Akiyama, Y. Sano, Y, Kohmura,
M. Yabashi, T. Ishikawa, H. Okada, and K. Yamauchi
"Development of adaptive Kirkpatrick-Baez mirrors based on mechanical and piezoelectric bending"
SPIE Optics+Photonics2018, oral10761-10 (19-23 Aug., San DIego Convention Center, San Diego, California,
US)
-
H. Kida, P. V. Bui, D. Toh, Y. Sano, S. Matsuyama, and K. Yamauchi
"High-efficiency Planarization of SiC Wefers by Water-CARE(Catalyst-Referred Etching) Employing
Photoelectrochemical Oxdation"
12th European Conference on Silicon Carbide and Related Materials(ECSCRM2018), WE.P.CO6 (2-6 September, The
International Convention Centre, Birmingham, UK)
-
R. Mukai, Y. Inoue, S. Matsuyama, K. Yamauchi, and Y. Sano
"High-speed thinning of 4H-SiC wafer by plasma chemical vaporization machining using a wafer-scale
electrode"
12th European Conference on Silicon Carbide and Related Materials(ECSCRM2018), WE.P.CO7 (2-6 September, The
International Convention Centre, Birmingham, UK)
-
K. Yamauchi(invited)
"Precision Measurement, Fabrication and Related Technologies for Grazing-incidence X-ray Mirror Optics"
Ultra Precision Manufacturing of Aspheres & Freeforms, (19 September, Fraunhofer IOF, Jena, Germany)
-
K. Yamauchi(invited)
"Advances in X-ray mirror optics for 3rd and 4th generation synchrotron radiation sources"
The International School on XFEL: Science and Instrumentation , (12 October, Hotel Bartan, Gdansk,
Poland)
-
K. Yamauchi(invited)
"Abrasive-free planarization method of functional materials by Catalyst-Referred Etching (CARE)"
2018 KSPE Autumn Conference, (25 October, GSCO, Gunsan, Korea)
-
K. Nishida, S. Okayama, S. Matsuyama, K. Yamauchi, and Y. Sano
"Numerically Controlled Plasma Chemical Vaporization Machining Using Array-Type Electrode toward
High-Throughput Deterministic Machining"
17th International Conference on Precision Engineering (ICPE2018), B-4-2 (12-16 Nov., Kamakura Prince Hotel,
Kanagawa, Japan)
-
D. Toh, P. V. Bui, H. Kida, T. Ohgushi, R. Ohnishi, S. Matsuyama, Y. Sano, and K. Yamauchi
"Fabrication of damage-free atomically smooth SiC surface using pure water and metal catalyst"
The Forum on the Science and Technology of Silicon Materials 2018, PC07 (18-21 Nov., Okayama University 50th
Anniversary Hall, Okayama, Japan)
-
T. Hirano, Y. Morioka, S. Matsumura, Y. Sano, T. Osaka, S. Matsuyama, M. Yabashi, and K. Yamauchi
“Development of High-Quality Stable Crystal Optics for Advanced X-Ray Applications”
The International Symposium for Materials Scientists (ISMS III), P23, (3-4 December, Osaka University,
Osaka, Japan)