International Conference

2024年 2023年 2022年 2021年 2020年 2019年 2018年 2017-2003年
  • K. Yamauchi (Keynote speech)
    "Recent Developments in Reflective X-ray Focusing Devices for Synchrotron Radiation Science"
    14th International Conference on Synchrotron Radiation Instrumentation (SRI2021) Oral (28 March - 1 April, ONLINE)

  • J. Yamada, S. Matsuyama, T. Inoue, N. Nakamura, Y. Tanaka, A. Ito, T. Osaka, I. Inoue, Y. Inubushi, H. Yumoto, T. Koyama, H. Ohashi, K. Yamauchi, and M. Yabashi
    "XFEL sub-10nm focusing system using Wolter type III-based advanced KB mirrors"
    14th International Conference on Synchrotron Radiation Instrumentation (SRI2021) Oral (28 March - 1 April, ONLINE)

  • T. Osaka, I. Inoue, J. Yamada, Y. Inubushi, K. Tono, S. Matsumura, S. Nakano, I. Ogasahara, Y. Sano, K. Yamauchi, K. Tamasaku, and M. Yabashi
    "Direct pulse duration measurements for hard x-ray lasers via intensity autocorrelation techniques"
    14th International Conference on Synchrotron Radiation Instrumentation (SRI2021) Oral (28 March - 1 April, ONLINE)

  • T. Inoue, S. Matsuyama, Y. Tanaka, Y. Ichii, J. Yamada, Y. Sano, Y. Kohmura, M. Yabashi, T. Ishikawa, and K. Yamauchi
    "Development of hard X-ray sub-5-nm focusing system with an adaptive multilayer focusing mirror"
    14th International Conference on Synchrotron Radiation Instrumentation (SRI2021) Oral (28 March - 1 April, ONLINE)

  • S. Matsumura, S. Nakano, T. Osaka, I. Inoue, M. Yabashi, and K. Yamauchi
    "Surface processing of micro-channel-cut crystal monochromator using plasma chemical vaporization machining with wire electrode"
    14th International Conference on Synchrotron Radiation Instrumentation (SRI2021) Poster (28 March - 1 April, ONLINE)

  • Y. Tanaka, S. Matsuyama, T. Inoue, N. Nakamura, J. Yamada, Y. Kohmura, M. Yabashi, K. Omote, T. Ishikawa, and K. Yamauchi
    "Development of image-based wavefront measurement for adaptive full-field X-ray microscopy"
    14th International Conference on Synchrotron Radiation Instrumentation (SRI2021) Poster (28 March - 1 April, ONLINE)

  • J. Yamada, S. Matsuyama, T. Inoue, A. Ito, T. Osaka, I. Inoue, Y. Inubushi, H. Yumoto, T. Koyama, H. Ohashi, K. Yamauchi, and M. Yabashi
    "Fabrication of XFEL sub-10 nm focusing optics based on advanced Kirkpatrick-Baez mirrors"
    7th International Workshop on Metrology for X-ray Optics, Mirror Design and Fabrication (IWXM2022) Oral (5-8 April, ONLINE)

  • T. Osaka, I. Inoue, J. Yamada, Y. Inubushi, K. Tono, S. Matsumura, S. Nakano, I. Ogasahara, Y. Sano, K. Yamauchi, K. Tamasaku and M. Yabashi
    "Direct characterization of hard x-ray laser pulse duration via intensity sutocorrelation techniques"
    7th International Conference on X-ray Optics and Applications 2022 (XOPT2022) in OPIC2022, Oral (19-21 April, Pacifico Yokohama, Kanagawa, Japan)

  • J. Yamada, S. Matsuyama, Y. Tanaka, H. Takano, T. Uruga, K. Yamauchi and M. Yabashi
    "Development of mirror-based full-field X-ray microscope toward XANES nano-CT measurement"
    7th International Conference on X-ray Optics and Applications 2022 (XOPT2022) in OPIC2022, Oral (19-21 April, Pacifico Yokohama, Kanagawa, Japan)

  • S. Matsumura, S. Nakano, T. Osaka, I. Inoue, J. Yamada, T. Togashi, K. Tono, K. Yamauchi, Y. Sano and M. Yabashi
    "Stretching pulse duration of hard X-ray laser up to 50 ps using rotated-inclined crystal"
    7th International Conference on X-ray Optics and Applications 2022 (XOPT2022) in OPIC2022, Oral (19-21 April, Pacifico Yokohama, Kanagawa, Japan)

  • Y. Tanaka, S. Matsuyama, T. Inoue, J. Yamada, T. Kimura, M. Shimura, Y. Kohmura, M. Yabashi, T. Ishikawa, and K. Yamauchi
    "Propagation-based phase-contrast imaging for full-field X-ray microscope with advanced Kirkpatrick?Baez mirror"
    7th International Conference on X-ray Optics and Applications 2022 (XOPT2022) in OPIC2022, Poster, XOPT-P-10 (19-21 April, Pacifico Yokohama, Kanagawa, Japan)

  • I. Ogasahara, S. Matsumura, S. Nakano, T. Osaka, K. Yamauchi, M. Yabashi and Y. Sano
    "Processing method using plasma chemical vaporization machining with wire electrode for narrow-gap channel-cut crystal X-ray monochromators"
    7th International Conference on X-ray Optics and Applications 2022 (XOPT2022) in OPIC2022, Poster, XOPT-P-9 (19-21 April, Pacifico Yokohama, Kanagawa, Japan)

  • A. Ito, J. Yamada, S. Matsuyama, T. Inoue, Y. Tanaka, I. Inoue, T. Osaka, H. Yumoto, T. Koyama, H. Ohashi, M. Yabashi, T. Ishikawa, and K. Yamauchi
    "Beam size characterization method of sub-10 nm focused XFEL using uniform nanospheres"
    7th International Conference on X-ray Optics and Applications 2022 (XOPT2022) in OPIC2022, Poster, XOPT-P-8 (19-21 April, Pacifico Yokohama, Kanagawa, Japan)

  • J. Yamada, S. Matsuyama, Y. Tanaka, H. Takano, T. Uraga, K. Yamauchi, and M. Yabashi
    "Advanced Kirkpatrick-Baez mirror optics based on Wolter type I and III configurations for hard X-ray full-field microscopy"
    15th International Conference on X-ray Microscopy (XRM2022), Oral, CP001-WMI20 (19-24 June, Online)

  • Y. Tanaka, S. Matsuyama, J. Yamada, T. Inoue, T. Kimura, M. Shimura, Y. Kohmura, M. Yabashi, T. Ishikawa, and K. Yamauchi
    "Propagation-based phase-contrast imaging with full-field X-ray microscope using advanced Kirkpatrick?Baez mirrors"
    15th International Conference on X-ray Microscopy (XRM2022), Poster, B011A (19-24 June, Online)

  • A. Ito, J. Yamada, S. Matsuyama, T. Inoue, Y. Tanaka, I. Inoue, T. Osaka, Y. Inubushi, H. Yumoto, T. Koyama, H. Ohashi, M. Yabashi, K. Yamauchi
    "XFEL sub-10 nm focusing system based on X-ray imaging mirrors"
    15th International Conference on X-ray Microscopy (XRM2022), Poster, B007A (19-24 June, Online)

  • D. Toh, P. V. Bui, S. Matsuyama, K. Yamauchi and Y. Sano
    "Fabrication of an atomically smooth polycrystalline surface without grain boundary steps using catalyst-referred etching"
    Euspen's 22nd International Conference, Oral (30 May - 3 June, Geneva, Switzerland)

  • K. Itagaki, D. Toh, P. V. Bui, S. Matsuyama, K. Yamauchi and Y. Sano
    "Preparation of highly planarized optical surface on Si substrate via catalyst-referred etching"
    Euspen's 22nd International Conference, Poster (30 May - 3 June, Geneva, Switzerland)

  • K. Takeda, D. Toh, P. V. Bui, S. Matsuyama, K. Yamauchi and Y. Sano
    "Planarization of polymer materials using catalytic reaction in pure water"
    Euspen's 22nd International Conference, Poster (30 May - 3 June, Geneva, Switzerland)

  • Jumpei Yamada (Promoted invited), Satoshi Matsuyama, Takato Inoue, Atsuki Ito, Ichiro Inoue, Taito Osaka, Yuichi Inubushi, Hirokatsu Yumoto, Takahisa Koyama, Haruhiko Ohashi, Kazuto Yamauchi, Makina Yabashi
    "XFEL single-nanometer focusing system at SACLA"
    The 15th Pacific Rim Conference on Lasers and Electro-Optics (CLEO-PR 2022), X-ray Lasers and Their Applications II, (Aug. 3, Sapporo, Japan)

  • J. Yamada (Invited), K. Yamauchi and M. Yabashi
    "XFEL Sub-10 nm Focusing Mirror System at SACLA for Achieving 10^22 w/cm^2 Intensity"
    The 40th International Free Electron Laser Conference (FEL2022), (22-26, Aug., 2022, Trieste, Italy)

  • M. Oshima, Y. Nakanishi, D. Toh, S. Matsuyama, K. Yamauchi, Y. Sano
    "Capacitance-voltage characteristics of SiC metal-oxide-semiconductor field-effect transistor thinned by high-speed plasma etching using high-pressure plasma"
    19th International Conference on Silicon Carbide and Related Materials (ICSCRM) 2022, (11-16 Sep., 2022, Davos, Switzerland)

  • J. Yamada (Invited), K. Yamauchi and M. Yabashi
    "Sub-10 nm XFEL focusing mirror system at SACLA for 10^22 W/cm^2 intensity"
    The international Science@FELs 2022 conference, (19-22, Sept., 2022, Hamburg, Germany)

  • K. Kayao, D. Toh, K. Yamauchi and Y. Sano
    "High-Speed Catalyst-Referred Etching of Gallium Nitride Assisted by Ultraviolet Light Irradiation"
    American Society for Precision Engineering (ASPE) 2022 Annual Meeting, Poster (10-14 October, Washington, USA)

  • K. Futamura, D. Toh, K. Yamauchi and Y. Sano
    "Surface planarization of polycrystalline silicon carbide by catalyst-referred etching"
    American Society for Precision Engineering (ASPE) 2022 Annual Meeting, Poster (10-14 October, Washington, USA)

  • Y. Tanaka, S. Kurimoto, T. Inoue, J. Yamada, Y. Kohmura, M. Yabashi, T. Ishikawa, and S. Matsuyama
    "Development of a Fourier Ptychography-based wavefront measurement method for mirror-based full-field X-ray microscopes"
    Asia-Oceania Conference on Synchrotron Radiation Instrumentation 2022(AO-SRI2022), Oral (9-12 November, Tohoku University, Miyagi, Japan)

  • S. Matsumura, I. Ogasahara, T. Osaka, I. Inoue, K. Yamauchi, M. Yabashi and Y. Sano
    "Surface finishing method for micro channel-cut crystal X-ray monochromator using plasma chemical vaporization machining with wire electrode"
    The 19th International Conference on Precision Engineering (ICPE2022), Oral (November 28 - December 2, Mara Prefectual Convention Center, Nara, Japan)

  • I. Ogasahara, S. Matsumura, T. Osaka, K. Yamauchi, M. Yabashi and Y. Sano
    "Damage-free processing of narrow-gap channel-cut crystal X-ray monochromators using atmospheric-pressure plasma with a wire electrode"
    The 19th International Conference on Precision Engineering (ICPE2022), Oral (November 28 - December 2, Mara Prefectual Convention Center, Nara, Japan)

  • G. Nakaue, T. Sai, D. Toh, K. Yamauchi and Y. Sano
    "High-speed etching of gallium nitride substrate using atomospheric-pressure plasma with hydrogen gas"
    The 19th International Conference on Precision Engineering (ICPE2022), Oral (November 28 - December 2, Mara Prefectual Convention Center, Nara, Japan)